Hog Trap Specifications

Two models currently being offered

  1. Swing Gate: gate is spring loaded, once tripped will close at an angle in the corner of the trap. This allows a void for the hogs to push their way through the gate even after the door is tripped. The Swing Gate design is able to catch multiple hogs.
  2. Root Gate: this design has a double gate that is hinged from the top of the trap. The gates can be used two different ways. You can set one gate that will fall once the trip line is triggered. Second you can close both gates and allow the hogs to root under the gate which is the natural way for a hog to eat. The Root Gate is also designed to trap multiple hogs at once.

These multi piece traps are designed to allow a single person to set up a trap site. The Swing Gate is a 5 piece unit and the Root Gate is a 6 piece unit. All traps will have a powder coat finish helping withstand abuse from the weather and the wear and tear of trapping hogs.

The advantage of the multi piece design is to reduce the amount of human traffic while setting up the trap. This will keep down the amount of human odor in the area and not keep the hogs away. Another advantage of the multi piece design is the ability to get the traps into a remote area. Each piece can easily be carried in to an area then assembled. This design will get your traps where the hogs are.

Our traps have no wire bottom. The natural ground floor will not make the hogs skittish while they are entering the trap.

Night vision hog trap Night vision hog trap Night vision hog trap Night vision hog trap